//Set up some variables for certain speeds
walksp=4; //Walking speed (4 pixels per frame)
jumpsp=-14; //Jumping speed (negative because it goes up)
grav=1; //Gravity strength (usually a small value)
//These variables are actually used to move the player
hsp=0; //Horizontal speed
vsp=0; //Vertical speed
ground=1; //Whether the player is on the ground

//Keyboard constants
//We use these so we can just type the variables
//instead of "keyboard_check(*)"

KEY_RIGHT=keyboard_check(vk_right);
KEY_LEFT=keyboard_check(vk_left);
KEY_JUMP=keyboard_check_pressed(vk_up);    
//This one's for variable jump height:
KEY_FALL=keyboard_check_released(vk_up);
//Now check if the player pressed left or right and move
if (KEY_RIGHT)
{
      hsp=walksp; //Walk right
      image_xscale=1; //Face right
}
if (KEY_LEFT)
{
      hsp=-walksp; //Walk left
      image_xscale=-1; //Face left
}
//Stop moving when no keys are pressed
if (!KEY_RIGHT and !KEY_LEFT) hsp=0;
//Make sure we don't hit a wall
if (place_meeting(x+hsp,y,objBlock))
{
      //Move until contact with the wall
      if (hsp!=0)
         while (!place_meeting(x+sign(hsp),y,objBlock))
            x+=sign(hsp);
      hsp=0;
}
//Because we don't use hspeed, we got to move ourselves
x+=hsp;
//Now for vertical motion (jumping and falling)
//Is the player in the air?
if (place_meeting(x,y+1,objBlock)) grounded=1;
else grounded=0;
//Jump with the up key when on the ground
if (KEY_JUMP and grounded)
{
      vsp=jumpsp;
}
//If we're in air moving up and jump key is released, we remove
//upward motion (so we fall and get variable jump height)
if (KEY_FALL and !grounded and vsp<-1) vsp=-1;
//Fall with gravity
if (!grounded) vsp+=grav;
//Now it's more complicated.
//When hitting the ceiling, vertical speed must stop.
//The if statement says, "if we hit the ceiling and are moving up"    
if (place_meeting(x,y+vsp,objBlock) && vsp<0)
{
      //We must move up until contact with the ceiling
      while (!place_meeting(x,y+sign(vsp),objBlock)) y+=sign(vsp);
      vsp=0;
}
//But if we are moving down and hit the floor, we have to land
if (place_meeting(x,y+vsp,objBlock) and vsp>0)
{
      //Move so we hit the ground
      var cc;
      cc=vsp+1; //A counter, so we don't get an infinite loop
      //Move down until we hit the floor
      while (!place_meeting(x,y+1,objBlock) and cc>=0) y+=1;
      //Now ground the player
      grounded=1;
      vsp=0;
}
//Again, we're not using vspeed, so we have to move ourselves
y+=vsp;
//Animation - check what our sprite's state is and set accordingly
if (grounded) //If we're grounded
{
      if (hsp==0) //Then if we're not moving, change to stand sprite
      {
         sprite_index=sprPlayerStand;
         image_speed=0; //Don't animate
      }
      else //But if we are moving, change to walk sprite
      {
         //Reset image index if just now switching to walk sprite
         if (sprite_index!=sprPlayerWalk) image_index=0;
         sprite_index=sprPlayerWalk;
         image_speed=0.5; //Change this to whatever works for you
      }
}
else //If we're not grounded, change to in air sprite
{
      sprite_index=sprPlayerInAir;
      image_speed=0; //Don't animate
}

if place_meeting(x,y,objVirtyHelmet) // а это объект к которому нужно дотронуться    
       {
       if (KEY_ACTION)
       {
       motion=0
       sprite_index=sprHelmetAnim // это нужная анимация
       alarm[0]=30
       }       
       }